Honeywell Gateway 500 Series OPC Server

The Honeywell Gateway 500 OPC Server reads and writes control data to and from various Honeywell UDC 500/3000/5000 single loop controllers and UDC 6000/5000 dual loop controllers connected to the Honeywell 500 Gateways. One Gateway is supported per serial port.

This Server meets the OPC Data Server Specification Version 2.0. It also supports OPC Version 1.0.

The Server has a graphical user interface (GUI) configuration environment with an "Explorer" look and feel. The configuration environment allows the Server to be configured with information such as which device to interface with and which data in those configured devices should be accessed. Once data points have been configured, the Server can communicate with these devices on behalf of the Clients. Data exchanged occurs between the Server and the defined device data locations.  These locations are defined as part of the configuration process generating Tags in the Server database. Clients and the Server then reference the data via the tag names.

The Server was developed by DASTEC Corporation using the OPC Server Toolkit from FactorySoft, Inc.

Specifications

  • Operating System Supported: Windows 95/98/NT/2000 and newer
  • Devices Supported: 500 Single Loop, 3000 Single Loop, 5000 Single Loop, 5000 Dual Loop and 6000 Dual Loop controllers
  • Number of Devices Supported: 1 to 31 controllers on each serial port.
  • Protocol: Honeywell protocol and command set documented in the Gateway 500 Product Manual.
  • Comm Port: Any OS supported system unit serial port(s) (32 max)
  • Commands Supported:
    • Reads for UDC 500, 3000 and 5000 Single-Loop Controllers
      Control Data: Command 01,05
    • Writes for UDC 500, 3000 and 5000 Single-Loop Controllers
      Mode: Command 13,00
      Set Point: Command 13,09
      % Output: Command 13,10
    • Reads for UDC 5000 Dual-Loop and 6000 Controllers
      Control Data: Command 02,04
    • Writes for UDC 5000 Dual-Loop and 6000 Controllers
      Mode: Command 02,04
      Set Point: Command 02,04
      % Output: Command 02,04
  • Paramaters Supported: All for the above commands

Required Additional Hardware
None

Required Additional Software
None

Ordering Information

Part No: OPC-HWGW